www.acta.nl academic center for dentistry amsterdam - ACTA
Dental Materials
     (Home)
Staff Ex-Staff
A van Dalen A Šozic AJ Feilzer AJ de Gee N de Jager CJ Kleverlaan P Pallav JM van der Zel
AJ de Gee left Up right
 

Dental Materials home

Acta services ( Acta people only):

ANWB traffic near Acta

 

 

 

Anton J. de Gee, PhD

Associate Professor
tel +31 (0)20 5188249
a.degee@acta.nl

Research interest

Publications

1-49

Alster, D., Feilzer, A.J., De Gee, A.J., Mol, A. & Davidson, C.L. The dependence of shrinkage stress reduction on porosity concentration in thin resin layers [published erratum appears in J Dent Res 1993 Jan;72(1):87]. J Dent Res 71, 1619-22 (1992).

Alster, D., Feilzer, A.J., De Gee, A.J. & Davidson, C.L. Tensile strength of thin resin composite layers as a function of layer thickness. J Dent Res 74, 1745-8 (1995).

Alster, D., Feilzer, A.J., de Gee, A.J. & Davidson, C.L. Polymerization contraction stress in thin resin composite layers as a function of layer thickness. Dent Mater 13, 146-50 (1997).

Ausiello, P., De Gee, A.J., Rengo, S. & Davidson, C.L. Fracture resistance of endodontically-treated premolars adhesively restored. Am J Dent 10, 237-41 (1997).

Bausch, J.R., de Lange, K., Davidson, C.L., Peters, A. & de Gee, A.J. Clinical significance of polymerization shrinkage of composite resins. J Prosthet Dent 48, 59-67 (1982).

da cunha Mello, F.S., Feilzer, A.J., de Gee, A.J. & Davidson, C.L. Sealing ability of eight resin bonding systems in a Class II restoration after mechanical fatiguing. Dent Mater 13, 372-6 (1997).

Davidson, C.L., de Gee, A.J. & Feilzer, A. The competition between the composite-dentin bond strength and the polymerization contraction stress. J Dent Res 63, 1396-9 (1984).

Davidson, C.L. & de Gee, A.J. Relaxation of polymerization contraction stresses by flow in dental composites. J Dent Res 63, 146-8 (1984).

Davidson, C.L. & de Kloet, H.J. [Longevity of restorations in composite and etched porcelain]. Ned Tijdschr Tandheelkd 98, 248-52 (1991).

Davidson, C.L., Abdalla, A.I. & De Gee, A.J. An investigation into the quality of dentine bonding systems for accomplishing a durable bond. J Oral Rehabil 20, 291-300 (1993).

Davidson-Kaban, S.S., Davidson, C.L., Feilzer, A.J., de Gee, A.J. & Erdilek, N. The effect of curing light variations on bulk curing and wall-to-wall quality of two types and various shades of resin composites. Dent Mater 13, 344-52 (1997).

de Gee, A.J., Hoekstra, I.S. & Davidson, C.L. Influence of lactate on the determination of HPO42- in apatites. Caries Res 11, 160-5 (1977).

de Gee, A.J., ten Harkel, E.C. & Davidson, C.L. Measuring procedure for the determination of the three-dimensional shape of dentures. J Prosthet Dent 42, 149-53 (1979).

de Gee, A.J. Some aspects of vacuum mixing of composite resins and its effect on porosity. Quintessence Int 10, 69-74 (1979).

de Gee, A.J., Davidson, C.L. & Smith, A. A modified dilatometer for continuous recording of volumetric polymerization shrinkage of composite restorative materials. J Dent 9, 36-42 (1981).

de Gee, A.J. [Various viewpoints on mixing composites under a vacuum and their effects on porosity]. Quintessenz 34, 2423-8 (1983).

de Gee, A.J., ten Harkel-Hagenaar, E. & Davidson, C.L. Color dye for identification of incompletely cured composite resins. J Prosthet Dent 52, 626-31 (1984).

de Gee, A.J., ten Harkel-Hagenaar, H.C. & Davidson, C.L. Structural and physical factors affecting the brush wear of dental composites. J Dent 13, 60-70 (1985).

De Gee, A.J., Pallav, P. & Davidson, C.L. Effect of abrasion medium on wear of stress-bearing composites and amalgam in vitro. J Dent Res 65, 654-8 (1986).

de Gee, A.J., ten Harkel, H.C. & Davidson, C.L. The influence of mixing ratio on the working time, strength and wear of composites. Aust Dent J 34, 466-9 (1989).

de Gee, A.J. [Bonding to dentin]. Ned Tijdschr Tandheelkd 97, 109-13 (1990).

de Gee, A.J., Pallav, P., Werner, A. & Davidson, C.L. Annealing as a mechanism of increasing wear resistance of composites. Dent Mater 6, 266-70 (1990).

de Gee, A.F., Feilzer, A.J. & Davidson, C.L. True linear polymerization shrinkage of unfilled resins and composites determined with a linometer. Dent Mater 9, 11-4 (1993).

De Gee, A.J., Wu, M.K. & Wesselink, P.R. Sealing properties of Ketac-Endo glass ionomer cement and AH26 root canal sealers. Int Endod J 27, 239-44 (1994).

de Gee, A.J. & Pallav, P. Occlusal wear simulation with the ACTA wear machine. J Dent 22, S21-7 (1994).

de Gee, A.J., Wendt, S.L., Werner, A. & Davidson, C.L. Influence of enzymes and plaque acids on in vitro wear of dental composites. Biomaterials 17, 1327-32 (1996).

de Gee, A.J., van Duinen, R.N., Werner, A. & Davidson, C.L. Early and long-term wear of conventional and resin-modified glass ionomers. J Dent Res 75, 1613-9 (1996).

de Gee, A.J., Leloup, G., Werner, A., Vreven, J. & Davidson, C.L. Structural integrity of resin-modified glass ionomers as affected by the delay or omission of light activation. J Dent Res 77, 1658-63 (1998).

Feilzer, A.J., De Gee, A.J. & Davidson, C.L. Curing contraction of composites and glass-ionomer cements. J Prosthet Dent 59, 297-300 (1988).

Feilzer, A.J., De Gee, A.J. & Davidson, C.L. Increased wall-to-wall curing contraction in thin bonded resin layers [see comments]. J Dent Res 68, 48-50 (1989).

Feilzer, A.J., de Gee, A.J. & Davidson, C.L. Relaxation of polymerization contraction shear stress by hygroscopic expansion. J Dent Res 69, 36-9 (1990).

Feilzer, A.J., De Gee, A.J. & Davidson, C.L. Quantitative determination of stress reduction by flow in composite restorations. Dent Mater 6, 167-71 (1990).

Feilzer, A.J., de Gee, A.J. & Davidson, C.L. Setting stresses in composites for two different curing modes. Dent Mater 9, 2-5 (1993).

Feilzer, A.J., Kakaboura, A.I., de Gee, A.J. & Davidson, C.L. The influence of water sorption on the development of setting shrinkage stress in traditional and resin-modified glass ionomer cements. Dent Mater 11, 186-90 (1995).

Feilzer, A.J., Dooren, L.H., de Gee, A.J. & Davidson, C.L. Influence of light intensity on polymerization shrinkage and integrity of restoration-cavity interface. Eur J Oral Sci 103, 322-6 (1995).

Herber, R.F., de Gee, A.J. & Wibowo, A.A. Exposure of dentists and assistants to mercury: mercury levels in urine and hair related to conditions of practice. Community Dent Oral Epidemiol 16, 153-8 (1988).

Pallav, P., Davidson, C.L. & de Gee, A.J. Wear rates of composites, an amalgam, and enamel under stress-bearing conditions. J Prosthet Dent 59, 426-9 (1988).

Pallav, P., De Gee, A.J., Davidson, C.L., Erickson, R.L. & Glasspoole, E.A. The influence of admixing microfiller to small-particle composite resin on wear, tensile strength, hardness, and surface roughness. J Dent Res 68, 489-90 (1989).

Pallav, P., de Gee, A.J., Werner, A. & Davidson, C.L. Influence of shearing action of food on contact stress and subsequent wear of stress-bearing composites. J Dent Res 72, 56-61 (1993).

Van Meerbeek, B. et al. Dual cure luting composites--Part II: Clinically related properties. J Oral Rehabil 21, 57-66 (1994).

Venhoven, B.A., de Gee, A.J. & Davidson, C.L. Polymerization contraction and conversion of light-curing BisGMA-based methacrylate resins. Biomaterials 14, 871-5 (1993).

Venhoven, B.A., de Gee, A.J., Werner, A. & Davidson, C.L. Silane treatment of filler and composite blending in a one-step procedure for dental restoratives. Biomaterials 15, 1152-6 (1994).

Venhoven, B.A., de Gee, A.J. & Davidson, C.L. Light initiation of dental resins: dynamics of the polymerization. Biomaterials 17, 2313-8 (1996).

Venhoven, B.A., de Gee, A.J., Werner, A. & Davidson, C.L. Influence of filler parameters on the mechanical coherence of dental restorative resin composites. Biomaterials 17, 735-40 (1996).

Wu, M.K., De Gee, A.J., Wesselink, P.R. & Moorer, W.R. Fluid transport and bacterial penetration along root canal fillings. Int Endod J 26, 203-8 (1993).

Wu, M.K., De Gee, A.J. & Wesselink, P.R. Leakage of four root canal sealers at different thickness. Int Endod J 27, 304-8 (1994).

Wu, M.K., De Gee, A.J. & Wesselink, P.R. Fluid transport and dye penetration along root canal fillings. Int Endod J 27, 233-8 (1994).

Wu, M.K., De Gee, A.J. & Wesselink, P.R. Leakage of AH26 and Ketac-Endo used with injected warm gutta-percha. J Endod 23, 331-6 (1997).

Wu, M.K., de Gee, A.J. & Wesselink, P.R. Effect of tubule orientation in the cavity wall on the seal of dental filling materials: an in vitro study. Int Endod J 31, 326-32 (1998).